Information about Tirak™

Principle of the Tirak™ X- and L-type traction hoist.

The units of the X- and L-type traction hoist Tirak™ have only a single drive disc. The grip of the wire rope on the pulley is obtained by springloaded pressure rollers.

The L-type traction hoist Tirak™ is much lighter in weight but still durable for temporary access applications that require frequent movements of the hoist.

Technical details TIRAK™ X-type and L-type hoists.

Admissable total load with passenger transport Rope speed Mode of drive Power Tirak™ rope-Ř Dead weight
Type kg m/min. - kW mm kg
X 300 P 300 9 3-ph 0,5 8 28
X 302 P 300 18 3-ph 1,1 8 28
X 301 P 300 9 1-ph 0,5 8 29
X 400 P 400 9 3-ph 0,75 8 29
X 402 P 400 18 3-ph 1,5 8 31
X 403 P 400 9/18 3-ph 0,75/1,5 8 35
X 401 P 400 9 1-ph 0,9 8 32
L 500 P 500 9 3-ph 0,9 8 29
X 500 P 500 9 3-ph 0,9 8 41
X 502 P 500 18 3-ph 1,8 8 44
X 503 P 500 9/18 3-ph 0,9/1,8 8 51
X 501 P 500 9 1-ph 0,9 8 49
X 820 P 800 9 3-ph 1,5 9 47
X 823 P 800 9/18 3-ph 1,8/3,6 9 53
X 1030 P 1000 9 3-ph 1,8 10 47
X 1033 P 1000 9/18 3-ph 1,8/3,6 10 58
X 2050 P 2000 6 3-ph 2,6 14 100
X 2052 P 2000 12 3-ph 5,5 14 120

Principle of the Air-Driven traction TIRAK™-XA hoists

For certain applications, e.g. in explosion hazard areas. The traction hoist TIRAK™ is available with an air-motor.

Technical details Air-Driven Tirak™ hoist

Admissable total load with passenger transport Rope speed Tirak™ rope-Ř Dead weight
Type kg m/min mm kg
XA 300 P 300 Up to 9 8 21
XA 500 P 500 Up to 9 8 36
XA 820 P 800 Up to 8 9 36
XA 1030 P 1000 Up to 6,5 10 36
© TRACTEL 2014