Accessories

Wire Rope

Wire Rope

Wire rope is an integral component of every wire rope hoist and winch supplied by Tractel. Selecting the correct wire rope and following a routine maintenance and inspection program will ensure that your hoists operate efficiently for many years.
Using Maxiflex wire rope in all of our manual and powered hoists will ensure the highest level of performance for your equipment. Maxiflex wire rope is specifically developed and constructed for use in Tractel products. Proper selection will ensure the maximum possible wire rope service life. If there are ever any questions contact our Engineering Department for assistance, (this is a requirement in situations where the load can spin freely or when winders are used).





Electrical Components

Electrical Components

All electrical components and installations conform to current regulations, giving peace of mind, security and minimum maintenance. Standard components available are the following:

Power Cord Assembly

Power Supply Yoke w/ molded Y (220V/1phase) 40 ft.

Duo meter gives you direct voltage & Amp in-line reading

Booster Transformer 4 KVA







Bumper Rollers

Bumper Rollers

Most structures require bumper rollers to keep the platform from damaging the facade. They can be placed in multiple positions along the platform. Heavy duty and non streaking. Different models are available to suit your requirements including extendable reach.







Arc Guard Welding Kit

The Arc guard kit is required by OSHA when welding on a platform (standard 1926.451 (f) (17) (IV)). The Arc Guard components are durable and easy to install. In case the wire rope is burned underneath the stage, the bottom hose is clear to see wire rope entering tirak while descending.

Arc Guard Welding Kit


Hoist Cover

Protects Tirak® from welding debris and splatter. This item is available for Electric or Pneumatic powered hoists.



Ground Assembly

6 ft. - 2/0 wire, 500A Welding Clamp, 800A Magnetic Welding Clamp & Kellums Grip.



Top Assembly

ID insulated tubing to protect wire rope located above the hoist.



Bottom Assembly

Split Tube with Velcro wraps and suspension u-bolt to protect wire rope located below the hoist.



Insulated Wire Rope Thimble

Insulates wire rope from rigging point.