BeamSlide

The BeamSlide sliding beam anchor is a mobile device designed for personal fall protection on structural beams. The flange widths range from 4 to 14 in. (100 to 355 mm) and flange thickness up to 1.5 in. (38 mm).

The BeamSlide sliding beam anchor can be attached to the top or bottom of a structural beam. The cross bar has grooves running along its length. It contains a mobile and stationary jaw.

FEATURES

• BeamSlide sliding beam anchor
• Autolocking positioning knob
• Steel rollers allow for smooth travel
• The presence of rollers allows the BeamSlide sliding beam anchor to move freely along the beam flange
• The jaw automatically secures its position on the cross bar
• The anchor can be installed on the beam flange quickly and easily
• The extension plate with a shackle provides a connection between the beam anchor and the shock absorber connected to the worker’s harness
• The use of a shock-absorbing lanyard or a retractable lanyard is mandatory
• It contains a mobile and stationary jaw
• Beam flange size 4 to 14 in. (100 to 355 mm)
• Flange thickness up to 1 1⁄2 in. (38 mm)
• Aluminum bar
• Capacity 310 lbs. (140 kg), one person

APPLICABLE STANDARDS  

• ANSI A10.32  
• OSHA 1926.500, subpart M1910.66, appendix C and Z359.1  
• Meets and/or exceeds 5,000 lbs. (22.2 kN) strength requirements for anchorage point