锚点（全部）

This product comes equipped with Tracinfo, an online service that simplifies the way you access product documentation. With Tracinfo, you can get instant access to manuals, certificates, and more with just a few clicks.  

Tracpode Pro三脚架是一款完美的可运输且易于安装的临时锚点，它结合了锚固点和提升功能。 由于可伸缩，它可以轻松适应不同的环境，以调整适当的高度。 这种铝制三脚架可以方便地运输和安装。它的体积小，便于用小型现场车辆运输，重量轻，易于搬运。 该设备的工作高度为1620mm，提供了一个可靠的固定点，以确保在有限的工作空间内最多2人同时进入。对于储存筒仓、下水道等密闭环境中的所有精细干预措施，Tracpode Pro三脚架允许您在没有任何坠落风险的情况下进行操作。 该设备进行了测试，用以阻止两名体重分别为150公斤的操作员坠落；包括其设备和工具的重量。 它允许两个用户安全工作。 它也可以用作起吊的锚固点，能够起吊250公斤的最大负载。 Tracpode... 

Ring designed to create an anchor point on a framework onto which a fall prevention device can be attached. - Polyester webbing strap. - Available in lengths of 0.6 m, 0.8 m and 1 m. This product comes equipped with Tracinfo,... 

Ring (supplied without connector) for anchoring on a structure on which a fall-arrest system has been installed. The AS19S GA is delivered with a protective sleeve against sharp or abrasive edges made of kevlar.... 

A new generation of strap AS30S 150 kg webbing anchor. These fall arrest EPI anchor points are tested to stop the fall of a mass of 150 kg, mass including the weight of a person equipped with its equipment. This product... 

配有锚固环的工字钢夹具。 结构紧凑坚固 快速简单地调整截面    

Mobifor是一种自重锚固系统，用于安装在平屋顶和有坠落风险区域。该套件由24个钢筋混凝土块配置组成，定位于四个钢臂上。臂在中心通过连接板连接，连接板配备有带减震器的旋转锚点。 规范 4个由镀锌钢制成的臂。 24个混凝土配重。 旋转锚点。 符合标准EN 795 E/2012。 NO TOOLS REQUIRED The connecting plate is set up with no need to drill... 

The Tractel® door bar anchor is a mobile anchor point that complies with the EN 795B standard. This bar has been specially designed to create a reliable and quick to install anchor point. It is positioned in the opening... 

推车 - 在较低的铁制脚踏板上行走 - 标准 CE EN 795 B 级 此产品配备了Tracinfo，这是一项在线服务，可简化您访问产品文档的方式。使用Tracinfo，只需点击几下，您就可以即时访问手册、证书等。    

Enables the creation of a mobile anchor point on an R.S.J. and to work in safety while retaining a wide freedom of movement. Thanks to its 4 bearing rollers, the rollclamp follows movements around the framework with a minimum... 

The ballsafe anchor point is made up of a four block plug and a female socket. It is sealed into concrete or a material of equal density using a chemical compound. - Complies with Standard EN 795  B This product comes... 

- Aluminium anchor point - Unpainted or painted - Secured with M12 screw at 100mm intervals  

Tested to stop the fall of one operator weighing 150kg (including the weight of his equipment). Stainless steel   Conforms to standard EN795-A : 2012.  

Tested to stop the fall of two operators weighing 150kg each (including the weight of their equipment) Stainless steel   Conforms to standard EN795-A  

The Ringflex anchor point is designed for installation on flexible roofs of corrugated tray (steel or aluminium), dry tray or rolled tray (top seal) types. The Ringflex is installed by means of different anchor plates,... 

Tested to stop the fall of one operator weighing 150kg (including the weight of his equipment). Stainless steel Includes fall indicator Fixes with a single M12 bolt   Conforms to standard EN 795-A  

These roof anchor points are designed to support a ladder and attach fall prevention devices. They are secured directly into wooden roof trusses using annealed crampons or spikes. - Complies with Standard EN795 A and EN517 -...