Safety Parking Clamp

The Safety parking clamps (SPC) are dedicated to securing lifting platforms used in the elevator industry by attaching the platform to the guiding rail. They are used as a secondary safety device, a primary safety device is mandatory.

In case of breaking of the lifting cable, the platform will fall and will immediately be blocked by the clamp.

• The back Safety parking clamp (BSPC), is attached to the back of the guiding rail of the elevator platform.
• The back safety parking clamp has a wider range but, it requires enough free space at the back of the rail (110 mm without the shackle, ~120 mm with the shackle ) to be installed, and is limited to 1.5t capacity.
• The front Safety parking clamp (FSPC) is attached to the front of the guiding rail of the elevator platform.
• The front safety parking clamp has a smaller range, is a bit lighter but has a higher capacity (2 t) and can be installed on every installation, since the required space behind the rail is very limited (20 mm minimum). It offers PVC covered handles to ease manipulation.

The safety parking clamps are designed to work on standard ISO 7465 rails, used for elevators. Other uses are forbidden.