Anchor points

 
Grid View List View
20 // 40 // 100
Previous page icon

Showing 1 - 39 of 39

Next page icon

Filter

Tracpode

  • Anchor point for 2 users of 150 kg each, suitable for working while suspended on rope.
  • Lifting anchor point complying with machinery standards 2006/42/CE - WLL : 500 kg.
  • Rugged mobile solution
  • Could be used in combination with manual and motorised lifting solution.

Tracpode - short model

This product comes equipped with Tracinfo, an online service that simplifies the way you access product documentation. With Tracinfo, you can get instant access to manuals, certificates, and more with just a few clicks.  

Tracpode Pro

  • Small size aluminum tripod
  • Height working position: 1.520 to 1.620 mm
  • Tested to stop the fall of two operators weighing 150 kg each

Tempo 2 - Temporary Lifeline

  • EN795 - CEN/TS16415
  • Can be installed on the ridge tiling of a roof or onto a metal structure
  • Can be used by 2 people

Tempo 3 - Braided Rope - Temporary Lifeline

  • Tempo 3 allows for simultaneous circulation by 3 users
  • Static rope line, N.G.R reinforced, adjustable from 0 to 18 m
  • EN795 - CEN/TS16415

Anchor AS19S

Ring designed to create an anchor point on a framework onto which a fall prevention device can be attached. - Polyester webbing strap. - Available in lengths of 0.6 m, 0.8 m and 1 m.  

Anchor Point AS19S GA

Ring (supplied without connector) for anchoring on a structure on which a fall-arrest system has been installed. - with protective sleeve against sharp or abrasive edges. - Webbing strap rings available in lengths of 0.6... 

Anchor AS30S

  A new generation of strap AS30S 150 kg webbing anchor. These fall arrest EPI anchor points are tested to stop the fall of a mass of 150 kg, mass including the weight of a person equipped with its equipment.  

Anchor - corso

Hitching clamp equipped with anchoring ring. - Compact and strong construction - Fast and simple adjustment to section  

Mobifor

The Mobifor is a deadweight anchoring system, for installation on flat roofs and fall risk areas. The set consists of 24, steel-reinforced, concrete blocks, positioned on four steel arms. The arms are connected... 

Rollbeam

Pushed trolley - Travels on lower iron footplate - Standard CE EN 795 class B  

Roll Clamp

Enables the creation of a mobile anchor point on an R.S.J. and to work in safety while retaining a wide freedom of movement. Thanks to its 4 bearing rollers, the Rollclamp follows movements around the framework with a minimum... 

Anchor - Ballsafe

The ballsafe anchor point is made up of a four block plug and a female socket. It is sealed into concrete or a material of equal density using a chemical compound. - Complies with Standard EN 795 B  

Anchor - PA

- Aluminium anchor point - Unpainted or painted - Secured with M12 screw at 100mm intervals  

Anchor - PAS

Tested to stop the fall of one operator weighing 150kg (including the weight of his equipment). Stainless steel   Conforms to standard EN795-A : 2012.  

Anchor - PO

Tested to stop the fall of two operators weighing 150kg each (including the weight of their equipment) Stainless steel   Conforms to standard EN795-A  

Anchor - Ringflex

The ringflex anchor point is designed for installation on flexible roofs of corrugated tray (steel or aluminium), dry tray or rolled tray (top seal) types. The ringflex is installed by means of different anchor plates, specific... 

Anchor - Ringsafe

Tested to stop the fall of one operator weighing 150kg (including the weight of his equipment). Stainless steel Includes fall indicator Fixes with a single M12 bolt   Conforms to standard EN 795-A  

Anchor - Roof Permanent Anchor

These roof anchor points are designed to support a ladder and attach fall prevention devices. They are secured directly into wooden roof trusses using annealed crampons or spikes. - Complies with Standard EN795 A and EN517 -... 

Anchor - Roof Truss

- Material : Steel - Support : wooden roof trusses - Standard : CE EN 795 class A  

Anchor post with a base plate for roof ridges 350 x 370 mm.

 

Anchor post with a base plate for roof ridges 350 x 370 mm.

 

Anchor post with a base plate for roof ridges 350 x 370 mm.

Insulated anchor posts with a stainless steel anchor ring. 70x70 mm cross-section, made of galvanised steel, with thermal protection. They are designed to eliminate the risk of condensation in winter when the outside temperature... 

Anchor post with a rectangular base plate 352 x 160 mm.

 

Anchor post with a rectangular base plate 352 x 160 mm.

 

Anchor post with a rectangular base plate 352 x 160 mm.

Insulated anchor posts with a stainless steel anchor ring. 70x70 mm cross-section, made of galvanised steel, with thermal protection. They are designed to eliminate the risk of condensation in winter when the outside temperature... 

Anchor post with a square base plate 270 x 270 mm, 20° inclined.

 

Anchor post with a square base plate 270 x 270 mm, 20° inclined.

Insulated anchor posts with a stainless steel anchor ring. 70x70 mm cross-section, made of galvanised steel, with thermal protection. They are designed to eliminate the risk of condensation in winter when the outside temperature... 

Anchor post with a square base plate 270 x 270 mm.

 

Anchor post with a square base plate 270 x 270 mm.

Insulated anchor posts with a stainless steel anchor ring. 70x70 mm cross-section, made of galvanised steel, with thermal protection. They are designed to eliminate the risk of condensation in winter when the outside temperature... 

Anchor Tester TA

Anchor testers TA are test specimens endowed with a breaking section calibrated to break under a determined traction force. The anchor tester must be installed between the anchor point to be tested and the loading device... 

Dynaplug HF 44

The Dynaplug anchor tester is an electronic load cell designed to measure anchor strength in construction material. The tool measures traction forces up to 5000 daN. Its shape as a tripod has been especially designed... 

Anchor post with a square base plate 270 x 270 mm.

 

Tirsafe - Wire Rope - Temporary Lifeline

  • Tirsafe T3 is a temporary lifeline that is easy and quick to install when there are two anchoring points
  • Conforms to standards EN795 : 2012 et TS 16415 : 2013

Travflex 2 150kg

  • EN795-C and the CEN/TS16415 for multi-user
  • Ase for a maximum of 3 users 100kg or 2 users 150kg
  • Quick and easy installation
  • No special tools are required for the installation

Travsafe 150kg

  • European norm EN795-C and the CEN/TS16415
  • Travsafe lifeline with its two cables is the most efficient and sophisticated lifeline on the market

Travsmart 150kg

The new travsmart lifeline is an evolution of the previous version. It complies with the European norm EN795-C:2012 and the CEN/TS16415:2013 for multi-user. As an extension of Tractel® High Capcity Range, the travsmart lifeline... 

Travspring 150kg

  • European norms EN795-C and CEN/TS16415 for multi-user
  • Certified for users weighing up to 150kg and allows simultaneous use for a maximum of 5 users at 100kg or 3 users at 150kg

Travspring One 150kg

The new travspring™ One lifeline is a derivative of the travspring™ lifeline. It complies with the European norm EN795-C:2012 and the CEN/TS16415:2013 for multi-user. It is designed as an elementary and cost effective lifeline... 

Previous page icon

Showing 1 - 39 of 39

Next page icon
Compare as many products as you like to help you make the right decision