Permanent anchor points Fall Protection

 
Grid View List View
20 // 40 // 100
Previous page icon

Showing 1 - 19 of 19

Next page icon

Filter

Anchor - Ballsafe

The ballsafe anchor point is made up of a four block plug and a female socket. It is sealed into concrete or a material of equal density using a chemical compound. - Complies with Standard EN 795  B This product comes... 

Anchor - PA

- Aluminium anchor point - Unpainted or painted - Secured with M12 screw at 100mm intervals  

Anchor - PAS

Tested to stop the fall of one operator weighing 150kg (including the weight of his equipment). Stainless steel   Conforms to standard EN795-A : 2012.  

Anchor - PO

Tested to stop the fall of two operators weighing 150kg each (including the weight of their equipment) Stainless steel   Conforms to standard EN795-A  

Anchor post with a base plate for roof ridges 350 x 370 mm.

 

Anchor post with a base plate for roof ridges 350 x 370 mm.

 

Anchor post with a base plate for roof ridges 350 x 370 mm.

Insulated anchor posts with a stainless steel anchor ring. 70x70 mm cross-section, made of galvanised steel, with thermal protection. They are designed to eliminate the risk of condensation in winter when the outside temperature... 

Anchor post with a rectangular base plate 352 x 160 mm.

 

Anchor post with a rectangular base plate 352 x 160 mm.

 

Anchor post with a rectangular base plate 352 x 160 mm.

Insulated anchor posts with a stainless steel anchor ring. 70x70 mm cross-section, made of galvanised steel, with thermal protection. They are designed to eliminate the risk of condensation in winter when the outside temperature... 

Anchor post with a square base plate 270 x 270 mm.

 

Anchor post with a square base plate 270 x 270 mm.

Insulated anchor posts with a stainless steel anchor ring. 70x70 mm cross-section, made of galvanised steel, with thermal protection. They are designed to eliminate the risk of condensation in winter when the outside temperature... 

Anchor post with a square base plate 270 x 270 mm.

 

Anchor post with a square base plate 270 x 270 mm, 20° inclined.

Insulated anchor posts with a stainless steel anchor ring. 70x70 mm cross-section, made of galvanised steel, with thermal protection. They are designed to eliminate the risk of condensation in winter when the outside temperature... 

Anchor post with a square base plate 270 x 270 mm, 20° inclined.

 

Anchor - Ringflex

The Ringflex anchor point is designed for installation on flexible roofs of corrugated tray (steel or aluminium), dry tray or rolled tray (top seal) types. The Ringflex is installed by means of different anchor plates,... 

Anchor - Ringsafe

Tested to stop the fall of one operator weighing 150kg (including the weight of his equipment). Stainless steel Includes fall indicator Fixes with a single M12 bolt   Conforms to standard EN 795-A  

Anchor - Roof Permanent Anchor

These roof anchor points are designed to support a ladder and attach fall prevention devices. They are secured directly into wooden roof trusses using annealed crampons or spikes. - Complies with Standard EN795 A and EN517 -... 

Anchor - Roof Truss

- Material : Steel - Support : wooden roof trusses - Standard : CE EN 795 class A  

Previous page icon

Showing 1 - 19 of 19

Next page icon
Compare as many products as you like to help you make the right decision