Other lifting equipment

 
Grid View List View
20 // 40 // 100
Previous page icon

Showing 1 - 16 of 16

Next page icon

Filter

AH - Autohook Lifting Hook

Fully automatic lifting clamp developed especially for lifting loads which are inaccessible or hard to reach by the operator (temperature, height, extreme conditions, etc.). With default handle for easy positioning. When... 

C-Hook

C-hook for lifting coils. For the transportation of coils, rolls and bodies with horizontal axles. Wiring system with cabling protected in plastic metallic conduits or alternatively in guide chains supplied complete with... 

CC - Container Lug

Lifting of containers by their standard ISO corners. 2 models : CCB: container lifted by the top or bottom, slantwise traction. CCV: container lifted by the top or bottom, vertical traction.    

CE – Swivel hook with safety catch

CE – Swivel hook with safety catch WLL from 0.8 to 22 tonnes Stamped hook and swivel Safety factor : 4 for alloy steel and 5 for carbon steel  

CH – High resistance anchor shackle

CH – High resistance anchor shackle WLL from 1 to 13.5 tonnes Security factor : 6 Bolt type anchor shackles with thin head bolt-nut, with cotter pin. Complies with US Federal specification (RR-C-271)    

CJ – Eye hook with safety catch

CJ – Eye hook with safety catch WLL from 0.8 to 8 tonnes Stamped hook Mainly fitted on sling or rope Safety factor : 4 for alloy steel and 5 for carbon steel  

CR - C-Shaped Lifting Hook For Coils

Lifting of coils and/ or turning over from the horizontal to the vertical position and vice versa. These accessories are fitted with a swivel shoe, locked during transport and therefore securing it which also permits the... 

Endless strap

 

LT - Bar For Separating Plates

Telescopic bar (830-1290 mm) with wedge at the end for separating plates in a bundle. The lever is fitted with a sliding shaft allowing its end between the plates. Extendable.  

Open strap

 

PalTurn™

The principle of Pal-Turn is to turn a load over in a space thanks to flat straps. Pal-Turn is made up of a bar - rotated by a gear motor – driving the load via straps fitted onto encased drive pulleys. A control button box... 

Rotablock

Motorization of the hook rotation : for liftinh, turning and positioning of loads from a distance. Designed to handle all capacities. Numerous applications: automotive industries, nuclear...  

TC Load Positioning Lifting Eye

The TC lifting eye is used to lift loads with an off-balance centre of gravity by using a single wire rope. It enables perfect balancing of the load. Once in position, the clamp will lock the wire rope in position under load.... 

TE Load Positioning Lifting Eye

The TE is used to lift loads with an off-balance centre of gravity by using a single lifting chain. It enables perfect balancing of the load. Once in position, the clamp will lock the chain in position after load. The chain... 

TF Load Positioning Lifting Eye

The TF lifting eye is used to lift loads with an off-balance centre of gravity by using a double wire rope. It enables perfect balancing of the load. Once in position, the clamp will lock the wire rope in position during... 

TO - Lifting Hook For Cable Reels

Suitable for lifting cable reels. For use in pairs. The opening in the reel must be between 55 and 83 mm. With a serrated finish on one side, which clenches the hook (serrated side pointing downwards) during lifting to keep... 

Previous page icon

Showing 1 - 16 of 16

Next page icon
Compare as many products as you like to help you make the right decision